Don’t Ignore Those Warning Beeps

Smoke and carbon monoxide alarms are among the most important life safety devices in a home, but simply having them installed isn’t enough. Knowing how to read their labels, recognize expiration dates and understand their warning sounds can make a critical difference during an emergency.

In a two-part home safety education series, local fire safety officials are encouraging residents to take a closer look at their smoke and carbon monoxide (CO) alarms and learn what those devices are telling them.

Carbon Monoxide Alarms

Carbon monoxide is an odorless, colorless gas that can be deadly. Because it cannot be detected by human senses, a properly functioning CO alarm is essential.

When purchasing a carbon monoxide alarm, look for a UL (Underwriters Laboratories) listing. This certification indicates the product has been evaluated against applicable safety standards. Fire safety officials recommend purchasing alarms from reputable retailers and checking for recognized safety certifications rather than relying solely on online product listings.

Residents should also check the manufacturer’s date, typically located on the back of the alarm. Most CO alarms have a service life of approximately seven years, although the specific expiration period depends on the manufacturer and model. Some devices begin their service life at activation rather than the manufacturing date. Always follow the manufacturer’s instructions.

Open Kidde carbon monoxide alarm showing two AA batteries, warning labels, and alarm condition instructions.

The alarm’s label also provides important information about warning sounds. Four rapid beeps generally indicate a carbon monoxide emergency. If the alarm sounds, everyone should immediately move outdoors to fresh air and call 911 or the fire department from outside. Do not re-enter until emergency responders say it is safe.

An occasional chirp, rather than the emergency alarm pattern, may indicate a low battery, a malfunction or that the device has reached the end of its service life. Consult the manufacturer’s instructions to determine the appropriate action.

Smoke Alarms

Smoke alarms provide an early warning that can give occupants valuable time to escape a fire. Like CO alarms, smoke alarms should carry a recognized safety certification, such as a UL listing.

The manufacturing date is another important detail. Most smoke alarms should be replaced every 10 years, or sooner if specified by the manufacturer. Over time, the sensors inside the devices can deteriorate, potentially affecting their ability to detect smoke reliably.

Close-up of a Kidde Model 20SD10-V photoelectric smoke alarm label showing safety certification, battery instructions, alarm indicators, and product specifications.

Discoloration can also be a warning sign. If a once-white smoke alarm has turned yellow, it may be aging and should be checked for its manufacturing date and expiration information. However, color alone should not determine whether an alarm needs replacement.

Smoke alarms use distinct sound patterns to communicate different conditions. Three long beeps commonly indicate that smoke has been detected. If there is no visible sign of smoke or fire, residents should still take the warning seriously and investigate from a safe location. If a fire is suspected, evacuate and call 911.

Intermittent chirping generally indicates a different condition, such as a low battery, malfunction or expired device. The manufacturer’s label or instruction manual can help identify the specific warning.

A Few Minutes Could Make a Difference

Both smoke and carbon monoxide alarms should be tested regularly, and batteries should be replaced according to the manufacturer’s recommendations. Residents should also make sure alarms are installed in the appropriate locations throughout the home.

The most important takeaway is simple: Don’t ignore an alarm, don’t overlook its expiration date and don’t assume a device is working just because it is mounted on the ceiling or wall.

Taking a few minutes to inspect these life safety devices could help protect your household when every second counts.

American Family Insurance and Kendall Henderson Agency, Inc. logo with the slogan “Building strong partnerships with trusted friends and neighbors.”

Discover more from Hale Multimedia LLC

Subscribe to get the latest posts sent to your email.

Leave a Reply

Powered by WordPress.com.

Up ↑